TEG1105P-4-63W is a Tenda PoE switch that offers 5 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-4 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 58 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as VLAN,  to help reduce cabling costs of IP terminals like APs and IP cameras. Highlights: 5 10/100/1000 Mbps Base-T RJ45 port. Ports 1-4: IEEE 802.3af/at PoE ports.   Lightning protection 6KV. Maximum power output of each PoE port: 30W. Maximum power output of the switch: 58W. Desktop size, Power Adapter Output 63W.   Support One-Key VLAN, Port 1-4 will be isolated respectively but can communicate with the 5 ports. Specifications: Product Mode: TEG1105P-4-63W Standards & Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3ab Switching capacity: 10Gbps Throughput: 7.44Mpps Dimensions (W × D × H): 100mm*100mm*26mm Lightning protection: 6KV Indicators: Link/Act, PoE Status, Power, PoE Max Interfaces: 4 10/100/1000Mbps RJ45 Ports (Data/PoE) 1 10/100/1000Mbps RJ45 Ports (Data) (Auto Negotiation/Auto MDI/MDIX) Capacity: Wire-speed forwarding: support Forwarding mode: Forwarding mode Mac Address Table: 2K PoE Supply: Port 1 to Port 4 support standard IEEE802.3at/af Power (maximum power for each port is 30W) PoE power type is end-span (12+, 36- and 45+, 78- line pair) Input Voltage: AC：100-240V~50/60Hz DC：51V /1.25A（Power Adapter Output） Power consumption: In full configuration: <63.7W Power Supply: 57.8W Environment: Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing One-key mode: VLAN Mode: If "vlan mode" is enabled, VLAN isolation is enabled. Port 1-4 will be isolated respectively but can communicate with the Uplink port. Default Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100/1000Mbps auto-negotiation.

Read more less

Featuring low cost, high performance and plug&play, the PoE switch TEG1105PD is both a PSE and a PD, designed for such surveillance networking scenarios roads in parks/communities, medium to large factories, and colleges. Small and delicate, it can be installed in an outdoor waterproof box easily. The switch provides four10/100/1000Mbps PoE OUT ports (ports 1 to 4) compliant with IEEE802.3af and one 10/100/1000Mbps PoE IN port (port5) compliant with IEEE802.3af/at. The maximum PoE output power of the whole switch is 22 W. The switch can supply power and transmit data to low-power APs and IP cameras through CAT5 cables, greatly reducing the cost of network deployment. It is an ideal choice for wired networking in monitoring scenarios of middle to long distance. Highlights: 5 10/100/1000 Mbps auto-negotiation ports Port 5 supports power supply by a PSE compliant with IEEE 802.3af/at Ports 1 - 4 support power supply to low-power PDs compliant with IEEE 802.3af The switch supports auto MDI/MDIX, simplifying the network structure and maintenance. The non-blocking wire-speed forwarding function guarantees the smooth operation of network applications. Full-duplex flow control and half-duplex back pressure control prevent frame loss caused by port blocking. The switch supports the store-and-forward transfer mode and a 2 K MAC address table. The switch supports 9K jumbo frame, improving the forwarding rate of large files. The switch supports IP camera connection and guarantees the smoothness and clearness of monitoring videos. Specifications: Product Model: TEG1105PD Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at LED indicators: 1 x Power LED indicator 4 x PoE LED indicators 4 x PoE LED indicators Fixed ports: 5 x 10/100/1000 Mbps auto-negotiation RJ45 ports (supporting Auto MDI/MDIX) Transmission media: 10Base-T: CAT3 UTP or better 10Base-T: CAT3 UTP or better 1000Base-T: CAT5e UTP or better Dimensions (L x W x H): 100 mm x 100 mm x 26 mm Product material: Metal Fan: Fanless PoE out: PoE standard: IEEE802.3af PoE power cable core: 8 cores: voltage of cores 1,2,4,5 is+, and cores 3,6,7,8 is- PoE port: 1-4 Maximum output power of a single port: 15.4W Maximum output power of the switch: 22W PoE in: PoE in standard: IEEE802.3af PoE in port: 5 PoE input: 50-57V DC，0.6A Protection: Port lightning protection: 6 kV Power lightning protection: No Electrostatic protection: Air discharge: ±8 kV Contact discharge: ±6 kV Forwarding mode: Store-and-forward Switching capacity: 10Gbps Packet forwarding rate: 10Mbps：14880pps 100Mbps：148800pps 1000Mbps：1488000pps Buffer: 1Mb MAC address table: 2K Jumbo frame: 9K MAC address learning: Auto-learning, auto-updating Installation method: Desktop mounting: Support Wall mounting: Not support Rack mounting: Not support Environment: Operating temperature: 0°C - 45°C Storage temperature: -40°C - 70°C Operating humidity: (10% - 90%), non-condensing Storage humidity: (5% - 90%), non-condensing

Read more less

SG108, designed by Tenda, are Ethernet switches with all gigabit ports. With high performance, fancy design and easy to maintain features, SG108 are especially fit for scenarios requiring fast transmission, such as schools, families, SMBs and small-scale surveillance. The switches provide several Ethernet ports for downlink extensions and can also connect to uplink network devices. Compared with 100M switches, SG108 have a transmission speed 10 times faster, capable of transmitting large files, thus solving the video lag and video loss problems for HD surveillance. Besides, SG108 support both desktop installation and wall mounting, can be played once plugged, and are easy to use without configuration. The switches are ideal choices for you to improve network performance. Highlights: Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3x. Provide 8 10/100/1000 Mbps auto-negotiation RJ-45 ports. Support auto MDI/MDIX function on all ports. Offer unblocking backplane bandwidth up to 10G/16G. Provide power and port status indicators, easy to check faults. Support desktop installation and wall mounting, with exquisite design on plastic shells. Specifications: Model: SG108 Network Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x LED Indicators: 1 * Power. 8 * Link/Act Ports: 8 * 10/100/1000 Mbps Base-T ports Transmission Media: Recommended: Cat 5 UTP, Cat 5e UTP or better Switching Mode: Store-and-forward Switching Capacity: 10Gbps Packet Forwarding Rate: 7.44Mpps MAC Address Table: 2K Total Power Consumption: <3W Power Input/Output: Input: 220V 50Hz AC Output: 5V 0.6A DC Dimensions (L*W*H): 82mm*52mm*22mm Environment:  Operating Temperature: 0℃ - 40℃ Storage Temperature: -40℃ - 70℃ Operating Humidity: 10% - 90% RH, non-condensing Storage Humidity: 5% - 90% RH, non-condensing

Read more less